rockabilly69

Just like I said about the Custom core 150's I think the Heritage is upping there game. I like that I have two of the old guard H150s, but I had to do a lot of to them to get them where I wanted. And Kuz fixed my H535 P90 guitar with everything I would have (thanks Kuz), befoe I bought it from him fret work (clean up file marks and level) replace nut (or at least re-slot it) new pickups (I'm not a fan of any humbucker they offered other than Throbak) change bridge and tailpiece (I never got the heavy Schaller tails or Nashville bridges) The new custom cores are closer in spec to what I like, but I wish they would use a proper abr instead of the cheap one they went with. I see they have gone with a different set of tuners which also seemed to be a mis-step with the CCs. But I LOVE the new headstock, the pickups sound nice, and I finishes look great (not the relic's, I'm not a fan of that, but for people who are they look pretty good). And I like the blocks on the the new H530 and H535 they look great!

I have ratio tuners on one of my Teles and they are great.

Looks great to me! These guitars look so much better with pickguards!!!

That tone just cuts through the room doesn't it! Glad to hear you're loving the Legends! Funny, one of my best friends loves the OOP tone, and constantly teases me about having MJ not flip the magnet in my SD Custom shop Peter Green set. He's a huge T-Bone and Peter Green fan. I like those tones too, but I love the standard middle position for Dickey Betts style tones more and that's a tone that I use a lot

When I first opened this post I didn't see the complaints, just the picture of the new guitar which looks sweet! BUT.... I've had more problems with Sweetwater than any other online dealer when it comes to missing things. The 55 point inspection is a joke! And worse yet, after buying some picks or a few sets of strings, you get a bothersome follow up cold call asking how you like them. If they really did a 55 point inspection and let that: dent, cracked ring, and abysmal soldering job get through their inspection, then shame on them! The neck pickup volume pot may be the worst solder job I've seen on an upscale electric guitar. It sucks when pots are soldered like that, because cleaning up those globs of solder means you have to reheat the back of that pot chancing damaging it. I do a lot of soldering of pots, and one thing I can tell you without a doubt, is that modern pots are not very well made, and don't handle the heat as well as the older stuff. If it was up to me, I would ask for a new pickup ring, and some replacement pots and solder them in correctly. The newlywed phase of buying a new guitar wears off fast, and after that, you're left with a guitar with less resale value than what it would have had without the issues! If you really love the guitar then I would address the solder job and ring, if not, I would return the guitar, and wait till you find a new one in the same finish without the issues, especially the dent!!! Have them ship it without the pick-guard on! That way if the grain looks nice. and you like the pick-guard off, the choice will be available to you! It was a special treat to yourself, why live with "the bummers"???? If Sweetwater doesn't make it right, return it and go to a better dealer!

I can see why you prefer the Wolfetones! I have a Legend in the neck of my Zemaitis, and I love it there. It has the clarity that really works in the neck. And when you plug it into a gained up amp it sings. I've said it many times, I think it's harder to find a great neck pickup than a bridge. But when a neck pickup is right it's amazing how much more you use it. Although I liked the Legend bridge pickup, I wanted to go with a hotter pickup in the bridge to fill out the mids, so I used a Wolfetone Fenris, and although it's listed as a high output pickup, it still retains what I like about un-potted PAF style pickups. Wolf winds great sounding responsive pickups.

I love that he played the cool Jeff Beck "Blue Wind" lick in the demo

Congrats, Wineburst is the color that got me to pony up for a new Heritage! Yours looks great. I love the cool squiggly looking flame on yours! Also Pro Alnico IIs are more my cup of tea vs the 59s so it's cool yours has those. Mine looks a lot like yours under the same lightning! Here's when I first got mine before I installed the pickguard and the rest of the mods. But It looks quite different under different light. And I Iike it much more after I swapped pickups (SD custom shop Peter Green set but without the swapped magnet), rewired (my solder job looked a lot like yours), swapped bridge and tailpiece with Faber locking stuff, and added the pickguard. I love this guitar!

Thanks, the amps are sure easier to get to now!

Even with my bigger room I was tripping over stuff if I didn't keep it organized. When I'm recording it can sometimes get a little cluttered, but before I leave the room I put everything back in it's place, unless we are picking up right where we left off the next day. This new room is actually set up a bit better than my last bigger room.

At home with my Marshall:)

Thanks Danny, your DIY racks help inspired me to get everything together. Having easy access to amplifiers is something I've always had a problem with. Even in my bigger studio they took up way too much room. Thanks Josh, the guitar rack was quite expensive, but it was the only one I could find that would hold that many cases. That was my biggest problem, the cases were taking up so much needed space. The goal is to keep it tidy, as I've got 100 lbs of sh*t in a 50 lb box so to say

Sound panels are on wheels so I just roll them out of the way when I need a guitar from the case rack...

I just moved into my new studio which is a smaller room, so I bought some shelves to save floor space, get the amps off of the floor, and make them easy to access. I found these cheap shelves at Wayfair. I was a little worried they would be too flimsy, but after putting them together, installing the center struts to stiffen the frames, and doubling up on the wood shelves, they are just fine. After putting together the three individual racks, I bolted them all together, which also stiffened them up. A bonus was that I had some extra room for mic boxes that were piling up on the floor by my recording racks:) When I record, I will take the amp(s) that I'm using off of the shelf, as I like the way they record on the floor... Amps are... Frenzel Super Deluxe Head, Clark Beaufort Deluxe (5E3), Mesa DC-2, Vox AC-15 Handwired, Fender Handwired Reverb Unit Clone (6K6 version), Dirty Girl Reverb (Supro Style 6973 tubes), Tophat Club Deluxe, Victoria Regal II, 1969 Vibro Champ, Fender Princeton Reverb Clone Handwired with vintage Fender transformers (Winnie Thomas), 1964 Fender Deluxe Reverb.

I know how you feel, I had a similar experience with Jason Lollar pickups. I had Imperials in on guitar that were totally blase', and then in the next guitar they were perfect. Maybe your H575 is the perfect match for those '59s!

Me either, I've only have one set of Duncans that I've stuck with, a Peter Green set (without reversed neck pickup). They are unpotted and slightly unbalanced. They've been in my H150 for almost as long as I've had it! They sound great. They came from the SD Custom Shop.

What color is my H150? The outside edge definitely has an orange hue!

All the mods looks great, especially the pickguard. Did Paul tell you the trick of putting the little felt/rubber spacer under the front screw on the pickguard. I figured that out with mine, and I think it aligns much better with it.

ain't that the truth!

thanks c

I put my money where my mouth is. New pickguard (Mojoaxe 5 ply BCBCB) on my Heritage H535 P90. I have to thank Paul (forum member Skydog) for sending me the correct template for my model, and also for hipping me to the fact that Dan at Mojoaxe had some Black/Cream 5 ply material to give my pickguard a more vintage look and a better match for my guitar. Most old Gibsons that I love have pickguard plastics that age slightly different than the bindings and I've always loved that look, which mine is sporting now! Here's an old '61 Gibson ES330, check out the different colors of the guard and the binding...

I agree with Grant, he knew his way around one of those guitars!

the purist in me says keep it on!

Well it's good to be loved professor, back at ya As for the finish I would have loved to watch Marv spray that one.