Kramer Posted November 11, 2022 Share Posted November 11, 2022 Was setting up a new H-137 today and a bridge stud broke and the piece lodged in the bridge(pure junk). As I understand, Gibson parts should drop in. Anyone out there use Gibson parts or know of a drop in upgrade bridge assemble ? Regards, Kramer Link to comment Share on other sites More sharing options...
big bob Posted November 11, 2022 Share Posted November 11, 2022 I changed mine to floating! Link to comment Share on other sites More sharing options...
bolero Posted November 16, 2022 Share Posted November 16, 2022 On 11/11/2022 at 2:45 PM, Kramer said: Was setting up a new H-137 today and a bridge stud broke and the piece lodged in the bridge(pure junk). As I understand, Gibson parts should drop in. Anyone out there use Gibson parts or know of a drop in upgrade bridge assemble ? Regards, Kramer Ouch! I think Gotoh makes good quality replacements? Or Faber? Somebody here with an H137 should have some specific advice though Some of them have locking hex screws that bind the bridge to the studs. Link to comment Share on other sites More sharing options...
DetroitBlues Posted November 17, 2022 Share Posted November 17, 2022 While I have not changed the bridge on my 137, I do have another guitar that has a wrap-around bridge. The Schaller Signum works great, fully innotatable saddles, and it has locks to prevent the bridge from tipping forward. https://schaller.info/en/bridges/351/signum Link to comment Share on other sites More sharing options...
Kramer Posted November 30, 2022 Author Share Posted November 30, 2022 thanks guys, I know about the hex screws, the studs were stuck in the body. I'll take a look at the Schaller Signum Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.