zguitar71
-
Posts
257 -
Joined
-
Last visited
-
Days Won
16
Content Type
Profiles
Forums
Gallery
Blogs
Events
Posts posted by zguitar71
-
-
The first thing I do is remove the pick guard on a new guitar. I cannot stand them, they are in my way. One thing I like about a carved top guitar is the room it gives my fingers and pick guards take that away.
-
17 hours ago, yoslate said:
I have it on good authority that the caterers provide those free dinners for the exposure....
Oh yeah, the catering gigs just come pouring in after that!
-
1
-
-
14 hours ago, zguitar71 said:
Oof! 14s are some heavy hitters. I run 13s on a ‘47 Epiphone Triump but I don’t really bend strings on that. For an electric archtop with a cutaway I use 12s with a wrapped G. I can still bend the e and b strings up an octave with that gauge. I have no doubt that 14s sound good though, I’ve always been a fan of heavier string sound.
Let me fix what I said. I bend up a whole step not an octave! I would love to be able to bend up an octave but…….
-
1
-
-
Oof! 14s are some heavy hitters. I run 13s on a ‘47 Epiphone Triump but I don’t really bend strings on that. For an electric archtop with a cutaway I use 12s with a wrapped G. I can still bend the e and b strings up an octave with that gauge. I have no doubt that 14s sound good though, I’ve always been a fan of heavier string sound.
-
On 4/3/2025 at 3:01 PM, rwinking said:
Easily affordable for the working jazz musician.
Ha! It’s all the free dinners at the gigs that really helps to put the big bills in the pocket.
-
2
-
-
If you have a 4x12 and a 1x12 with the exact same speaker used and they are running the same ohms (let’s just say both cabs are 8 ohms) then the volume will be close for both cabs. The sound will be very different though because of the big cab and all that surface area of the speakers. The big cab can keep the low end together and put out a lot of it. The 1x12 speaker is working 4x harder than any one of the 4 in the big cab so it will sound very different and have a harder time keeping the bass as tight as the big cab. Though the volume will be close to the same if not the same for both, the way your ears perceive the sound makes the big cab feel louder.
-
1
-
-
A speaker that is rated at twice the amp power rating has long been the safe standard, or the combination of multiple speakers equaling twice the rated power. I personally don’t think that is really necessary though. I have now built 3 6g3 amps and paired them with 65 watt Scumback M75 Speakers. I would use lower wattage but there isn’t one until you get down to 25 watts. The amps have varied in output based on the power transformer used and plate voltage supplied. The lowest wattage of the three was 12.9 clean and 17.4 cranked all the way up with 355 volts on the plates. That would be fine for a 25 watt speaker. The first one I built I used a vintage spec PT and had 440 volts in the plates which gave almost 30 watts when fully turned up, that would not be good for a 25 watt speaker. So from a manufacturing standpoint, a company would spec a speaker that can cover variations like that. Smaller builders may have much less variation or can even spec the speaker based on a single build. I’m comfortable with a speaker that is around 10 watts more than the amp is rated for something lower wattage like a 17 watt amp. I built a JTM 45 that maxes out at 42.78 watts (JTM 42.78?) and I’m comfortable using the same 65 watt M75 in that amp but I probably wouldn’t go lower than that. The last gig I used that amp on I had a 200 watt Eminence Em12n speaker and it sounded great, especially clean. There is zero speaker breakup but the dirty sound is just a little sterile compared to the M75 that gets a little breakup and adds some warmth to the sound. Some may prefer the 200 watt speaker though, to each their own. The amp has a master volume and I turned it down to the level the sound guy wanted, then when I got home I measure the output. I played the gig at 14.5 watts dirty and about 8 watts clean with a 200 watt speaker. 8 watts with an efficient speaker is louder than most people realize and with todays stage management makes amps like the JTM 45 obsolete without a master volume or attenuation. I have a 20 speaker that is going into yet another 6g3 variant I’m building only this is a single channel and uses 6k6GT power tubes and should max out at 10-12 watts and be perfect for most places I play.
-
2
-
-
It is recent and on the custom core models only, the standard models have the original size head stock.
-
1
-
1
-
Opinion on H-555 for Sale
in Heritage Guitars
Posted
If that is a crack I would be apprehensive about the guitar because it looks like it runs through all the mounting holes on the right side for the bridge, the string retainer and the Bigsby. Idk is $2700 is high for a perfect guitar but one with a big scratch I think it is and if it a crack it is way too high. As for the color, I love the blue and gold and the inlays are lovely on the fret board.