bluespower69 Posted May 21, 2022 Share Posted May 21, 2022 Hi All, Is there a direct replacement (no drilling needed) in the keystone plastic (white / greenish) tuner knob style for the Heritage H150 grover tuners? Thanks Link to comment Share on other sites More sharing options...
PunkKitty Posted May 21, 2022 Share Posted May 21, 2022 Post a pic of the front and back of the headstock. That will help. Link to comment Share on other sites More sharing options...
kbp810 Posted May 21, 2022 Share Posted May 21, 2022 If you’re just looking for new buttons to retrofit onto your Grover’s; hipshot buttons fit Grover’s; and they have quite a few options. If you’re looking to swap entire tuning machines; then as PK said, would help to see the back to see what mounting position your current timers have. Link to comment Share on other sites More sharing options...
PunkKitty Posted May 21, 2022 Share Posted May 21, 2022 Note that if you are replacing the tuners, Hipshots will not work. Heritage headstocks are slightly thicker than Gibsons. It's just enough to make stringing the guitar difficult. Use Gotoh, Grover, or Kluson tuners. Some Sperzels will also work. Link to comment Share on other sites More sharing options...
Lkdog Posted May 21, 2022 Share Posted May 21, 2022 I replaced the tuning buttons only. You have to work with the screw tension a little bit when you swap them. Link to comment Share on other sites More sharing options...
bluespower69 Posted May 21, 2022 Author Share Posted May 21, 2022 Thanks all, I'll look into the hipshot buttons! My H150 is a 2017 model. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.