Leaderboard

About 10 years ago I bought this guitar from someone in Ohio. He wasn't a player, but a friend of his recommended he invest in a couple of new guitars at a guitar show in Cincinatti, if I recall right. This is a Heritage Johnny Smith with an 18" body. I'd like to tell you a good reason I sold it the next year. I think it was a matter of money. I'm not sure. I sold it to a great guy and a forum member. Later he bought a couple of other Heritages from me. Fortunately for me, he agreed to sell the HJS back. There were two 18" HJS made AFAIK. Both were in Cincinatti. Don Dean, of Scotty Moore and Elvis fame, ended up with one. That one is a natural and is 3 1/4" deep. The incoming is the traditional 3" deep. The natural finish one was owned by a friend of mine who had the Floating #3 pickup rebuilt by Kent Armstrong, making it a little hotter. You can hear a difference. https://www.youtube.com/watch?v=lsM3VeXzpVw This is the incoming sister of the natural. It's a rose natural and has the standard Floating #3, which to me sounds warmer. I'm excited!

I think the fret wire is standard Jesco stuff. It's pretty much used industry wide, unless you go with stainless. I don't remember the number, though. The caps in most Heritages are Vishay MKT metalized film. They are yellow axial capacitors and are good caps. The pots can vary over the years, depending on availability. They use standard audio taper pots. I have tried changing pots and to be honest, sonically there was no change. I had one that was scratchy, so I replaced all 4 with CTS pots. The only difference was in the feel, as I used low torque CTS with a 15% taper which changes the rate of volume change as you turn the knob. They also made it easier to turn, which might be good or bad, depending on your style. Wire is wire... You can get nice cloth covered vintage style wire, but it won't change the sound. It's pretty and if you want it to look like 1959, then go for it. Jacks and switches are pretty much generic. If they are clean and work, they're good. If they get dirty and noisy, or cut out, then change them out. I've used Switchcraft and cheapos from China and as long as they are quiet and solid, they're fine. Depending on how you like to roll off volume, I added a treble bleed to my 157 for a while. I liked it's effect more than 50s wiring or standard wiring. Here's my 157 control cavity with treble bleeds and the stock pots and caps. As I had changed a noisy switch, I changed the cable running up to the switch with a shielded cable. (the grey stuff).

What a unique and beautiful specimen!

Welcome LL. The resident "expert" on lefty guitars would be Lefty Alicia. She has been at most of our PSPs with various guitars. Here's her Millennium.