2005 Heritage H-150

[DLDTEX]

Howdy from Texas. It has been while since I posted but I need the resources of the forum. I have a question about a 2005 H-150 that Jay Wolfe didn't know.  I have included a picture of the headstock and want to know what the 230 means above the serial #.

 

 

[mars_hall]

Serial sequence (230th) of a limited edition run.  Possibly more info on the rear control cover (inside)

[DLDTEX]

Thanks makes since with the ornate headstock and bindinding on body.

[skydog52]

If it has a belly cut it is probably a H-150 Deluxe.  They were numbered.

Edited April 16 by skydog52

[Heritage1970]

2 hours ago, DLDTEX said:

Howdy from Texas. It has been while since I posted but I need the resources of the forum. I have a question about a 2005 H-150 that Jay Wolfe didn't know.  I have included a picture of the headstock and want to know what the 230 means above the serial #.

 

 

Definitely a numbered run. Pop the cover off the back and see if it says anything. Keep us posted!

[hopkinwfg]

Nice topic !! Share pics on this beauty !!

Edited April 16 by hopkinwfg

[bolero]

that one was made down the street at 230 Parsons

[DLDTEX]

Good morning and thanks for the input. I contacted Heritage and Ren (Heritage Historian). He said it was Deluxe from a build of 500. A friend has it now but I get it back this weekend.  I will look into the cavity this weekend.

Thanks again

top.pdftop.pdf

[DLDTEX]

Trying to post a picture. Here is another attempt

top.pdf

[DLDTEX]

final attempt. Feeling inept

[DLDTEX]

here is the headstock

 

 

[golferwave]

Great looking H-150! Gotta love the bound headstock!

[DLDTEX]

I have gotten to spend a weekend with the H-150 Deluxe. For various reasons a friend of mine had it after purchase because of the weight. It was about 9.5lbs. Did know at the the time that is the norm though there are always variations.  Ren from Heritage  gave me the following info and the cavity cover confirmed it.  The pickups are Seth Lover Zebras that deviate from the spec as well as the tuning pegs are not Grovers.

Product Details
__________________
Top: Curly Maple upgraded
Back: Mahogany
Neck: Mahogany
Fingerboard: Rosewood
Scale: About 628mm- (24-3/4")
Pickup: Humbucker×2
Pegs: Grover
Weight: About 4,28kg

Accessories: Heritage Hard-case. More info on label under back control cover.  Be careful  not to chip finish.

Thanks for the input.

[bolero]

those are nice pickups!