Leaderboard

I know, this is a silly, maybe even sophomoric topic. But, that said, this is the Heritage Owners Club, right?! 🙂 And haven't we all thought about all of the many Heritage gitfiddles we've owned, played or lusted after? You know, that uber-flame-top H-(whatever) model that you never should have let go. Or maybe that sweet axe that you've worn down the frets on, and rubbed the finish off, due to its irresistible tone and feel? It doesn't matter if your favorite is an Ascent, Standard, Custom Shop, Core, Artisan-aged, Custom one-off, or an old school from the early days of Heritage. Bring it! And share a photo if you have one. No model is off limits as long as it is a Heritage Guitar. I'll kick things off with my all time favorite model...it's the no longer in production H525. I've been blessed to own two of these great instruments, but my all time favorite is the one-off custom that Marv built to my specs back when they built almost anything customers or dealers asked for. Here's a photo of Marv just after spraying it, taken by our dear friend, Ron (High Flying Bird) Warren. OK, YOUR TURN!! LET'S SEE YOUR FAVORITE HERITAGE!!

It's hard to choose favorites. Here are two. The first is a Johnny Smith 18". The second is a H-530 custom made with humbuckers.

My favorite Heritage and me waiting to go play at a jam. 2001 H535 in blonde, with HRW's. I put the Faber bridge and tail on it, and a set of lightweight Gotoh tuners. The heavy Rotomatics were really stiff from disuse. I got this one used a few years ago. It was absolutely pristine with virtually no sign of play. I picked it up browsing at a guitar shop, wasn't even looking. But it instantly had "the sound" that I look for in a great semi-hollow 535 or 335 style guitar. It had a problem that explained the utter lack of play. The fretboard was like a roller coaster. Some heroic efforts to level the frets on the wavy fretboard had been done to it along its history. Some of the frets were tall as brand new wire, others were under .030 tall, what most of us would call worn out. The fret tops were level, but the board wasn't. The neck itself, straight as an arrow. The surface of the board was nuts. I tried everything I could think of, but just one day said, "this is it." and grabbed my fret puller pliers and took them all out. I put some fine grit paper on my leveling beam and lightly sanded, which revealed all the high and low areas. Pretty much like a lunar landscape it turned out. Also, I measured the radius at around 9.25 inches which kind of meandered up and down the neck. Clearly, this one escaped the factory with a wonky fretboard. The fret nibs were all intact, so no question it was built this way. I leveled the fingerboard and flattened the radius down to about 10". I was already sanding into the pearl dots by then. Didn't want to get into replacing inlays, so I stopped about there. Put in a set of Dunlop medium jumbo wire. With the board leveled out, the frets went in nicely and only needed minimal leveling after installation. I put in a CNC-cut nylon 6/6 nut. Nylon was used on the Gibson's of the late 50's and early 60's. It is a fabulous material for guitar nuts. Hard, durable, and extremely slippery. The Faber hardware went on after. The Schaller stuff was shiny and clean without a single speck of corrosion, but I'm so used to tune-o-matic bridges, I changed it. The most amazing bit of that were the deep bushings Faber offers for their ABR and the tailpiece. They sink much deeper and tighter into the wood and really get in that maple center block a lot better than the short and skinny Schaller bushings. The tone change from the bushings alone was remarkable. And here she is. This is a 100% keeper for life guitar. It's everything a semi-hollow guitar should be. Plays like butter, sings like a bird.

These are my favorites, A Heritage Johnny Smith and its Mini-Me The Heritage Millennium SuperLight.