brentrocks Posted June 30, 2018 Author Share Posted June 30, 2018 The guitar arrived today.....I decided to attack the headstock first. there is a big chip missing off the treble side...oh well It went together and glued up well IMG_7628 by brent HENDERSON, on Flickr IMG_7629 by brent HENDERSON, on Flickr IMG_7630 by brent HENDERSON, on Flickr IMG_7631 by brent HENDERSON, on Flickr IMG_7633 by brent HENDERSON, on Flickr Link to comment Share on other sites More sharing options...
brentrocks Posted June 30, 2018 Author Share Posted June 30, 2018 Time for stage 2 The neck pocket break was nice and tight. I lightly scraped off remaining glue film from the insides of the pocket and the heel before gluing. The break was left in a way that made it very easy to line up and make sure that it was going back in the right place. I brushed on a hearty dose of tight bond to all the appropriate areas that were to make contact. Gently slid the neck back into position, checked to make sure that all edges were ozzzing….and then applied the clamp. I will probably let the neck clamp set for at least 48 hours before I take it off....realistically, I think it only needs 24 hours for the wood to absorb the glue and cure....but I'm not gonna take any chances. This is by far the boldest attempt at a guitar repair I have ever done....but that's how you learn and get better, right? IMG_7639 by brent HENDERSON, on Flickr IMG_7640 by brent HENDERSON, on Flickr IMG_7641 by brent HENDERSON, on Flickr IMG_7642 by brent HENDERSON, on Flickr IMG_7643 by brent HENDERSON, on Flickr IMG_7644 by brent HENDERSON, on Flickr IMG_7645 by brent HENDERSON, on Flickr Link to comment Share on other sites More sharing options...
HANGAR18 Posted June 30, 2018 Share Posted June 30, 2018 You went with Tightbond 1? Link to comment Share on other sites More sharing options...
brentrocks Posted June 30, 2018 Author Share Posted June 30, 2018 11 minutes ago, HANGAR18 said: You went with Tightbond 1? Yeah. I had it here. Used it before with great success Link to comment Share on other sites More sharing options...
RJLII Posted June 30, 2018 Share Posted June 30, 2018 Tight bond 1 is the right call. Not as much open time as Tightbond 2 but you don’t need it. Glad to hear you scraped off the old glue. This could wind up being a great player grade guitar. The kind of thing you take to barn jams where adult refreshments might be served. Link to comment Share on other sites More sharing options...
golferwave Posted June 30, 2018 Share Posted June 30, 2018 Good looking repair Brent, Looking forward to seeing the finished product! Link to comment Share on other sites More sharing options...
brentrocks Posted June 30, 2018 Author Share Posted June 30, 2018 I’m not gonna string it up until Monday night. Keep our fingers crossed!!!! Link to comment Share on other sites More sharing options...
FredZepp Posted June 30, 2018 Share Posted June 30, 2018 This is going to be interesting.. Can't wait to see how it ends up. Link to comment Share on other sites More sharing options...
brentrocks Posted June 30, 2018 Author Share Posted June 30, 2018 16 minutes ago, FredZepp said: This is going to be interesting.. Can't wait to see how it ends up. If it doesn’t blow up when I put strings on it. Lol Link to comment Share on other sites More sharing options...
myoldfriend Posted June 30, 2018 Share Posted June 30, 2018 On 6/27/2018 at 3:01 PM, golferwave said: Unbelievable damage. Looks like they put the guitar in the cage with the gorilla they used in the American Tourister luggage commercials years ago. Good luck Brent, I know you can do it! I am appalled by your lack of sensitivity Scott. That commercial turned out to be the big break that Koko needed in order to lead a productive life - eventually getting hired by UPS as Michigan's first Wait a second...! Link to comment Share on other sites More sharing options...
myoldfriend Posted June 30, 2018 Share Posted June 30, 2018 . Link to comment Share on other sites More sharing options...
HANGAR18 Posted June 30, 2018 Share Posted June 30, 2018 2 hours ago, RJLII said: This could wind up being a great player grade guitar. The kind of thing you take to barn jams where adult refreshments might be served. Yes, I have high expectations for my next guitar. hahahaha Link to comment Share on other sites More sharing options...
TalismanRich Posted June 30, 2018 Share Posted June 30, 2018 Brent, have you considered a little wood filler and a respray of the headstock repair? You might even be able to fill a few of the little dents in the wood. Link to comment Share on other sites More sharing options...
brentrocks Posted June 30, 2018 Author Share Posted June 30, 2018 55 minutes ago, TalismanRich said: Brent, have you considered a little wood filler and a respray of the headstock repair? You might even be able to fill a few of the little dents in the wood. Nahhh. I’m just gonna play it Link to comment Share on other sites More sharing options...
Genericmusic Posted July 1, 2018 Share Posted July 1, 2018 Nice fix. I usually mist the "open wood with water several times before clamping. The moisture opens the grain and allows deeper penetration of the glue. Titebond 1 was a good call. The extra clamping time is a good idea. Good work. Can't wait to hear it in action. Link to comment Share on other sites More sharing options...
brentrocks Posted July 1, 2018 Author Share Posted July 1, 2018 I purposely ordered new locking tuners to force me to keep it clamped longer.....I tend to be impatient. tuners come tomorrow Link to comment Share on other sites More sharing options...
ElNumero Posted July 1, 2018 Share Posted July 1, 2018 This is like a drama movie unfolding...... You could go to work with Dan Erlewine with all the experience you are getting. He used to live in Ann Arbor too! Link to comment Share on other sites More sharing options...
HANGAR18 Posted July 1, 2018 Share Posted July 1, 2018 Brent, my wife said I can't buy that guitar from you under any circumstances. So, there's that. Link to comment Share on other sites More sharing options...
Farmboyjo Posted July 1, 2018 Share Posted July 1, 2018 I saw this one on eBay. With the two breaks, I wondered if it was one the guitars that were intentionally destroyed a few months ago - and somebody just pulled it out of the pile off the loading dock. Was watching this one when it was super cheap but quit when I thought it wasn't a great deal anymore. Obviously a bad call by me. Nice work Brent! I never would have thought of doing the work myself but you're making it look easy. Sure excited to see how this all turns out. Link to comment Share on other sites More sharing options...
brentrocks Posted July 1, 2018 Author Share Posted July 1, 2018 I just wanted to say, regardless of the outcome, THANKS TO EVERYONE FOR THE POSITIVE SUPPORT!!!! I’m not a great player and I’m not a pro Luther but I try hard and I always like to share my experiences with my fellow players and enthusiasts. It’s fun for me. Link to comment Share on other sites More sharing options...
RJLII Posted July 1, 2018 Share Posted July 1, 2018 I was watching a Pete Thorn video a while back and he was talking about a thinline semi he has that had a headstock break. After the repair the guitar was magical. I thought long and hard about this in the context of the Brentster. I conclude that if the repair is executed properly and the guitar does indeed become magical, he will become a great player with no more than six or eight lessons as opposed to the several hundred he used to claim it would take. I like his odds. Just saying. Link to comment Share on other sites More sharing options...
brentrocks Posted July 2, 2018 Author Share Posted July 2, 2018 Well....ill be honest. I was biting my nails in anticipation. I did the deed today....strung it up!!! It passed with flying colors! It sets up great...low action. I haven't been able to play it through a REAL amp yet because my basement is flooding and I had to put my Marshal in the garage. I did play it through my lil Peavey solid state and it sounds really nice. Needless to say, I'm very pleased with myself for fixing this. IMG_7648 by brent HENDERSON, on Flickr IMG_7649 by brent HENDERSON, on Flickr IMG_7650 by brent HENDERSON, on Flickr IMG_7651 by brent HENDERSON, on Flickr IMG_7652 by brent HENDERSON, on Flickr IMG_7653 by brent HENDERSON, on Flickr IMG_7655 by brent HENDERSON, on Flickr IMG_7657 by brent HENDERSON, on Flickr Link to comment Share on other sites More sharing options...
brentrocks Posted July 2, 2018 Author Share Posted July 2, 2018 Link to comment Share on other sites More sharing options...
FredZepp Posted July 2, 2018 Share Posted July 2, 2018 Sounds great.. glad to see it's solid and ready to rock. I like that wood pickguard too. I bet that it howls through the Marshall . ( sorry to hear about your basement ) Link to comment Share on other sites More sharing options...
brentrocks Posted July 2, 2018 Author Share Posted July 2, 2018 Thanks Fred!! 535 and Seths is about as good as it gets!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.