All Activity

One could always have a new truss rod cover made with "40". Custom Inlay will make whatever you want, including in Heritage's shape, in Mother of Pearl, Black/White or Abalam.

I do like the idea of a "40 Years" or "40th Anniv" as a 12 fret marker, much like the Millennium 2000 used for the upper markers.

My 25th 535 only has a commemorative truss rod cover

I know she can't be including you!

🤣

Get off my lawn!

My wife asks me that quite often

If memory serves, previous models had a banner inlay in the headstock.

Cleaning house I suppose. There were a few for sale on Reverb.

of course, they had to use a PICKUP truck to get them to the dump! 😃

At a minimum, they could have had a 40th Anniversary truss rod cover to set them apart...

Thanks ElNumero, I'll look forward to seeing what's available.

I totally agree huge mistake on their part. They could’ve put 40 on the 12th fret or something to commemorate it and to set it apart, other than the fact that you have to look at the serial number to know it’s a 2025 Guitar.I

Sorry Rich you keep lamenting about that and I’m sitting here with two of them in my closet!! no you can’t have one

Why would they sell off the templates and to whom?? Makes no sense

Built 40 years after the plant opened in 85.

FYI- I purchased a 2016 new old stock H155M in vintage wine burst last year at the plant. It was hanging in the showroom and I couldn’t resist. They made me a very sweet deal. They buffed it, gave it a PLEK job, and a setup before shipping it out to me. Heritage takes care of their HOC constituents.

Thanks DetroitBlues. I think I have my wife convinced to go; she enjoyed Kalamazoo the last time we were there.

You can buy direct from the factory show room, usually at a discount too, so you'll save some money there. I bought my H150 that way 2 years ago. Plus, you may find some unique one-off's you will not find in any store too. Back to the original point, rough cutting of solid bodies and necks are all that CNC work does. The CNC's are heavily used for the Harmony guitars, so you'll see a lot of them on the machines.

I promised my wife a trip Marty. Bribery always works with her. Thanks Rich. I will see what I can do about attending PSP. From what I've read it sounds like a good time.

While the Ascent and Ascent+ lines are good entry levels, they aren't made in the same factory as the standard and Custom Core ranges. Len, you should join us for this year's PSP, and see the way things have changed. While many things are still being done "old school", there are some improvements, like the spray booth where the air is filtered (no dust to get on the finish, and safer) and the PLEK machine to make sure the guitars have consistent setups. Heck, you might just find the exact guitar you want while you're there!

I have a H-530 that is just great. Part of it is how it feels. It's very light. Acoustically it's louder with resonance I can literally feel. Mine has humbuckers, which is fine with me. The H-576 is a very nice model. They tend to be stunning and have a nice feel to them.

Thanks so much for the answer, Rich. I purchased their Ascent+ model earlier this year, and the playability of that guitar, especially considering the price, is so good, I now want to upgrade to a Standard as a Christmas present to myself. You sound like me. My wife would say that since I like the Ascent+ so much, I should stick with it and shut up!

Thanks so much for the answer, Rich. I purchased their Ascent+ model earlier this year, and the playability of that guitar, especially considering the price, is so good, I now want to upgrade to a Standard as a Christmas present to myself. Since I'd prefer to buy new, mostly because I like the idea of helping a great company, l just wanted to make sure that I wouldn't be making a mistake buying new instead of something prior to the Bandlab ownership. I took the tour in 2017 and was so impressed by the guys building the guitars, that I've wanted one ever since. So again, thanks so much for the answer.

The guitars that I have played at the factory were every bit as good as my 2005 535. I don't think you'll find CNC robots making the H535s. I believe that they might be rough carving the necks (not sure if this is absolutely true), but putting together a semihollow body is a multistep process that doesn't lend itself to CNC manufacturing. The top and back are a 3 piece laminated sandwich that is then steam pressed in a form that gives it the arch. The center block is a solid block with the pickup areas cut out, and there is a piece that matches up to fill the gap between the top and block. Then you have kerfing that is applied to the rim before the top and bottom are glued. The pieces are then assembled by hand to form the body. Rough cutting the neck profile means that the starting shape should be more consistent in terms of thickness and curvature, but there is still a lot of handiwork to finalize things. If you've ever watched someone hand rolling a neck, there can be a lot of variation. It doesn't take a lot of sanding to go from a fat to a thin neck. In the past it was all done freehand, checking it with a pattern every so often. If you think about it, the old duplicarver was a primitive "cnc" machine, minus the computer. It's akin to the patterns that someone like Hillerich & Bradsby uses when carving baseball bats. A CNC just follows a computerized form to cut the wood.