All Activity

I have used Boss, Gator, Boice Box, and currently use Pivotal Pedalbords.

I believe mine is ash.

I was very, very close to using one of these. But I also use the four-cable method too. My Wampler Terraform has presets in which I can decided if I want an effect to go into the front of the amp or the effects loop for all my modulation stuff. Then run a UA Del-Verb for my delay and reverb needs which I use mostly as a set it and forget it.

Much bigger facility. Heritage has limited capacity and manpower. Plus they also make Harmony guitars there as well which are priced slightly below Heritages these days, only major difference is more CNC work and easier construction methods.

For quite a while now I’ve been using a TC Electronics Plethora X5 - five “slots” into which you can put any of the TC Tone print pedals. Each set of five constitutes a “board” and the unit can hold 127 boards! There are plenty of videos showing how it can be used, but I tend to have a relatively simple setup, with the effects being mainly modulation/delay/reverb in the effects loop of the amp. No overdrives, but I use the amp’s overdrive for solos and a Fuchs Plush Drive in front of the amp for a bit of crunch. My setup is Guitar -> wah -> Plush Drive -> Plethora input -> Plethora Insert send to amp input -> amp fx send to Plethora Insert return -> plethora output to amp fx return. The board I tend to use most has the Viscous Vibe as the first pedal, before the Insert Send (so the signal is going from the vibe into the amp’s input), with the signal from the amp’s fx send into Corona Chorus, Pipeline Tremolo, Flashback Delay and Hall of Fame Reverb, and back to the amp’s fx return. I hope that makes sense... You can edit the effects on the unit, and you don’t have to press anything to save - your changes are saved when you exit edit mode. There are firmware updates, most recently the Infinity Sample Sustainer has been added to the available toneprints. Ever since I heard the 1973 Robert Fripp/Brian Eno collaboration No Pussyfooting, I’ve been a fan of ambient music. They used a couple of Revoxes for tape delays, but this chap shows how you can do it with the Plethora...

What brand you using?

I just bought a nice mint condition Gretsch G 5420 T from a local fellow and he included in the deal a little Marshall MG 50 DFX amp. My first thought was what do I need this for? But once I plugged it in and played around with it it’s a nifty little amp that I think I will keep if not for any reason it’s a great practice amp. My other favorite go to, although it’s not really a modeling amp, is my deluxe, Reverb tone master. I absolutely love that amp. The versatility is amazing and it does sound like a deluxe reverb.

I had to look up the H-717.

Glancing at the homepage, today I found this: It just seemed a bit confusing for a second. The H-150, 530 and I believe 575 are all available as Custom Core models as well.

I guess we'll see. F-brand and G-brand still continue their made in USA standard lines, at the apex of their standard lines. It is undeniable that inexpensive guitars sell in higher volume and make up the bulk of revenue, at much thinner margins. The lure of inexpensive off-shore products is undeniable. Pretty much everyone with some volume is doing it. I think it waters down the brand, especially if not clearly labeled in a way that is clear what it is. Strangely, Gibson will make some Epiphone models in the US from time to time, despite its position as their off-shore less-expensive line.

Well said Kuz! Almost every new guitar I see on the three different Heritage FB pages I follow/moderate, people are buying the Custom Core models and loving them. I think Heritage has shown the CC line is fine instrument for the money. Heritage maybe following the PRS business model making their USA models as their high-end and the budget models being the SE lineup (and the SE's have drastically bridged the gap to be gig worthy guitars that closer resemble their USA made counter-parts0

I am happy they are selling robustly! And I am glad you are enjoying yours as well. I just hope Heritage keeps manufacturing their standard line as I believe there is a market, they are great guitars in their own right. If I could afford a CC I would buy one. But being retired and on a fixed income has its limitations

I have both Dan!!!

What size do you want? How many pedals are you going to use? Are you going to be using a pedal looper system or only the pedals themselves? Do you want a 2 tier system? Do you want a hard lid or gig bag? Are you going to be using multiple power supplies? I just finished a pedalboard rebuild that is HUGE and the cost was significant. My pedalboard weighs 40-45lbs. It is perfect for me for use at home with almost all my pedals available at anytime for recording use or just playing at home. I think you need to be more specific to the questions above to get a recommendation.

Well, considering there are not a lot of manufacturing differences for Heritage between the standard line and the custom core line, and considering they are pricing the custom core line anywhere from 1/2 to 1/3 more than the standards,... then I would say Heritage's profit margin is MUCH higher with the custom core line. And thus, fewer custom core guitars need to be sold to keep a higher profit over the standard line. Also, I think the custom core line has been a HUGE success. Of all the Heritage guitar owners groups forums (obviously here at HOC and on Facebook), the number of owners reporting a new custom core Heritage purchase BY FAR out weighs the number of new standard line Heritage purchases. For me, the lighter weight on my Custom Core 150 has justified it's price. Last night, I played the Aged CC 150 comparing it to my Murphy Ultra Lite aged R9. Other than the different frets on the CC 150, I am not so sure the CC 150 is not a better guitar.... again, validating the price of the custom core line.

I'm an established guitar hoarder.

Get a piece of wood !

From what Pete Farmer said in the Rich Severenson interview, the Bespoke program is really on hold unless you're an "established artist".

Sorry, Will, but I don't have any experience with those. I have a PedalTrain with an Eventide power supply. A nice setup, but it stays on the shelf mostly. I generally plug straight in.

I may be mistaken, but here is what I remember/assumptions: Mahogany Body with a Strat-like body Bolt-On Maple Neck Banana Headstock Bill Lawerence Humbucker Bridge Pickup Single Volume Control Only 24.75" Scale Maple Fretboard Fixed Tele-like bridge Some weird fuzzy like paint finish. Does that sound about right? I believe this is bare-bones student model like guitar. My guess is this developed from the short-lived idea of Heritage building Fender guitars.

My guess is the Custom Shop Bespoke program and Custom Core line need the capacity to keep up with demand....

You just demonstrated the difference between a CPA and MBA (Me Being Amusing) =MBA

That analogy is not completely accurate! As I said, I am not the bean counter for Heritage, but I would be willing to bet that their CC sales are less than 10% of their total sales. Now in terms of revenue, yes, they realize a larger profit margin % with the CC line. But think about all the international sales they do each month, and I am pretty sure they are mostly from the standard lineup. If you beg to differ, lets hear it!!

Cause you can sell buttered bread for more that the ingredients alone. Take coffee: A bag of beans is $6 for 10 ounces. Add hot waters and you can sell it for $5 for 12 ounces of mostly water. If you can make 30 cups out of 10 oz of beans that's $150 from a $6 investment.

Thanks for the hundreds of suggestions peeps, ya'll are awesome, which is why I am on here so much! 🤷‍♀️