All Activity

I’m trying to contact the seller to see if maybe that was his brother‘s name underneath there? Whoever wrote those labels out in that era really needed to practice on their penmanship. Lol.

Beauty, Brent. Can't make out what the label has below 'Custom Made'. Any idea what it says?

Thanks fellas!!! This is a very special 157. A great representation of what Heritage was capable of back then.

That's a gorgeous top! I always liked the headstock on the 157 vs the 150. The binding and the diamond inlay just look RIGHT! I'm also partial to the block inlays. It needs the bound wooden pickguard, tho. The tan plastic just looks so.... generic! A 157 is about class. 😜

@brentrocks...Wow, beautiful H157 Custom! Congratulations on yet another amazing score. 👍

2006 Heritage H157 Custom order one off. *AAAAA Quilt top *Single ply binding on both sides of the body (it’s usually 5 ply) *Abalone blocks (usually pearl) *Ebony fretboard *One piece mahogany body *One piece mahogany neck *Bound and Inlayed peghead *Gold locking Sperzel tuners *Gold hardware *8lbs 14ozs *Really nice 59-ish neck carve Just got this today from a gentleman in Georgia. He was selling it because it belonged to his late brother, who was a gigging musician. He said his wife custom ordered it in 2006 The original pickups, SD Seth lovers, were poorly wired into a rats nest harness…the tone pots didn’t even work. So I rewired it, new pots, Russian PIO caps and different pups. I wanted something with more bit…so I went with a SD JB/Lollar Imperial combo…and it sounds great!!!!! The original nut is pretty worn. The D and the G buzz just a bit. I’ll probably take it in for a new bone nut soon. The frets are original. With minor wear. You can tell it was played. There’s a bit of buckle rash on the back. A few dings n dents. Nothing more than a Murphy lab relic. Lol. 😆 The neck on this guitar is perfect, IMO. To me it feels like a custom core neck that went on a little diet. Lol. 😂 It’s not a boat anchor ⚓️. Basically 9 lbs. for a 157….thats not terrible. It plays and sounds so dammm good. Wow!! 🤯

Cool looking guitar Brent. I love ebony fingerboards, and cool Sperzel tuners, much better than the Grovers. What the he*l did that guy do to his thumbnail though in that picture of the back of the guitar Looks like he was a player. He turned the neck pickup around. A lot of people do that to get a slightly brighter sound and clean up the neck tone, especially when you drop the pickup into the ring and bring up the pole piecers a bit. Check out my Guild. It made a significant difference tonewise.

s'nice

Looks like big fun !

This is a Heritage that I’m VERY excited about. (I don’t get too excited about much anymore. Lol) It’s a 2006 H157? I think? I say that because it does have binding on the back of the body….but…doesn’t have multi ply binding on the top. It does have an Ebony board (with abalone blocks) and it does have a bound and inlayed headstock. I haven’t seen the control cavity sticker yet. Lol This guitar was sold by the original owners brother…his brother was a gigging musician in Georgia. Unfortunately he had passed away recently. He told me that his wife custom ordered this guitar for her husband in 2006. I really don’t know much about it. Don’t know how the frets are, don’t know the neck size, don’t know what pickups are in it, don’t know how much it weighs….. Look at that top though….nice bubble quilt, definitely a custom order!!! The fella I got it from seemed very honest and trustworthy, so I decided to take a chance on it. These were the only 5 pics I had to go by… Its on the UPS truck for delivery today!! STAY TUNED!!!!

The H-137 I had was equipped with Lollars. They sounded like a P90 should.

Mine has Lollars and I love them Heritage 530

the 225's sound great from the clips I've heard, more like the Duncan Antiquity than the Lollar ( I have both )

Has anyone compared the Lollar P90's that were in the H530 compared to the new Heritage brand P90's?

which by the way, I just snagged . The owner was very reasonable, and it will make a great compliment to the 535 and 575

This 2023 beauty has Duncan's stock .

I've got 2 sets of Lollar 90's as well as a custom low wind set of PAF's from Jason. Great Pickups. The Duncan Antiquities are a bit less noisy , have them in 3 instruments

Well, if you want to go down the deep side of the rabbit hole, I just picked up a used set of ThroBak pickups and installed them in my Gibson custom shop R0 in place of the Custom Bucker 3 p'ups they come with. It is shocking how different they sound than the Custom Buckers and how different they sound than the SD '59 pickups that came stock in my 1998 H150. I measured the inductance, capacitance, field strength and so on, and I have notes on all the pickups I own, including the HRW's in my 2001 H535. Despite being in the range of low-output PAF on every parameter, the ThroBaks are just shocking how bright, clear, harmonic and punchy they are. That goes for the Seth Lovers as well, which are a touch brighter and clearer than the 59's, but man. The only humbuckers in my collection that come close to the ThroBak are the HRW's, but they are a different style of pickup being hotter wound and the bridge especially so. I do know that ThroBak acquired a vintage winding machine from Heritage, that was left over from the Gibson days. ThroBak uses a variety of the same exact winder machines that Gibson used, even some of the actual winders from Gibson. If you know ThroBak at all, it all sounds like absolute hype, but the product performs. I've witnessed hands-on several examples, including my own now. I have no temptation to replace the HRW.

I just don't get this mystique, but maybe I play the wrong kind of music to appreciate these pickups. A close friend of mine used to be a Heritage dealer so I've played a few sets of HRWs, but I always preferred the sound of Duncans in the Heritages I've heard, with my favorite being the Antiquities or Seth Lovers. One thing I do like though is the double adjustment screw for the angle as Iike the pickups to be parallel with the strings. I wonder why more people don't do that and just supply the pickups with new rings.

In my experience if you can a great clean sound out of guitar, it's nothing to get a great dirty sound, and I heard all that I needed to hear in the clean section of your demo. Those pickups really sound good. I love how clear the neck pickup sounded, and there was some great harmonic content in the chords that you were playing on the bridge pickup. I would leave those pickups in that guitar, it's a great match.

I’ll do a clip for ya!!!

Not horrified, just wishing you record that current setup so we can hear the tone of that beast.