Tackling high frets on H137

[brentrocks]

I was thinking about taking my Heritage H137 Custom to Sweetwater’s for a PLEK job. $300 plus shipping costs. 

I can’t get the action as low as I think it should be. So I checked the frets last night with a fret rocker I have several high frets above the 12th!! 

I have files, crowned, leveled and polished frets before. I’m no pro. Lol.   I was just thinking PLEK because I was being lazy. But a couple hours out of my Saturday vs $350….its a no brainer. 

Well…wish me luck 
 

[brentrocks]

The problem is high frets above the 12th fret. I went over it with a fret rocker. The 13th is high. The 15th is high. The 19th is high. 

The bridge has plenty of adjustability 

The neck angle is good. 

The question of the hour is….can I knock down those high frets and accomplish what I set out to do?

I have filed, dressed, crowned and polished frets before. It really hurts my hands but I can do it. 

I think I’m gonna go for it. 

It’s a good Saturday project.

 

[tsp17]

Only way to learn is to do it.  Go get'um Brent.  Good project.  Let us know how it turns out.  I'd like to learn to do more of my own guitar tech work too, so you'll be my role model!  

[TalismanRich]

Have you tried tapping down those few frets?   I've heard of instances where a fret lifted a bit, but when tapped,  was reseated and fine.    

[brentrocks]

1 hour ago, TalismanRich said:

Have you tried tapping down those few frets?   I've heard of instances where a fret lifted a bit, but when tapped,  was reseated and fine.    

I have not?   I would be afraid to miss and hit my finger.   LOL

[brentrocks]

[brentrocks]

[rockabilly69]

Do you have a levelling beam or radius block? I don't see you doing that step in your pics?

 

[pressure]

I see Flitz ahhh, everything will be alright.

[brentrocks]

1 hour ago, pressure said:

I see Flitz ahhh, everything will be alright.

You have me that tube, my friend!!!

[brentrocks]

3 hours ago, rockabilly69 said:

Do you have a levelling beam or radius block? I don't see you doing that step in your pics?

 

I have a 12 inch radius block.   But that fretboard was a 14 inch radius!!!!   I couldn’t believe it!!!!!

[rockabilly69]

8 hours ago, brentrocks said:

I have a 12 inch radius block.   But that fretboard was a 14 inch radius!!!!   I couldn’t believe it!!!!!

you can make a levelling beam from scratch...

 

[MikeJacob]

You are going in the right direction. Tap them first. If still not resolved, spot level the high frets. I wouldn't pleck it. That machine removes too much material and if you don't have the right tech doing the job, the machine will gouge your fretboard and binding. I know some people swear by it, but what that machine did to my Les Paul Special was nothing short of a massacre.